Revolutionize Your Lawn Maintenance with the Best Lawn Mower Blade Sharpener in Town
Velva Lemmon asked 1 year ago
Mower blades are an essential lawn maintenance tool, however making the wrong choice could cause damage to your mower and cause health hazards. Follow this guide to identify the correct mower blades for your lawn.
Standard blades are made to cut grass quickly and send it to the bagging process. They also mulch well.
They Cut Grass
Regular blades are simple to operate and cut grass into tiny fragments. The resulting pieces of grass to be taken back to the soil, where they can be fertilized. These blades are less likely to accumulate dust than other kinds of grass.
Blades with a lower lift is suitable for sandy terrain as it requires the smallest amount of power to work. This kind of blade won’t produce a large amount of dust to be blown in the air and can last longer than other kinds of blades.
They are more suction-driven than the other blades. They are able to process grass clippings to smaller pieces that can then be disposed of or bagged. These blades are great for lawn care companies that have clients with different needs regarding the handling of grass clippings. The versatility of these blades is a benefit however they aren’t as durable like carbide blades or steel. They may require more maintenance including cleaning, balancing and sharpening.
They Mulch
The blade of a regular lawnmowers produces a strong vacuum over the ground, which allows grass to be cut with precision. The suction can also draw up dust and moves it across the deck, which can cause rapid wear and tear to the mower.
High lift blades on the contrary, suckers up grass, accelerating it to be easily dumped into an incline discharge chute or bag. They typically feature a more curvaceous surface and additional cutting edges along the edges for greater mulching efficiency.
The best results are achieved by selecting the best blade for your lawnmower. If you want to be certain that the blade you choose is the right one look up the code or part number on the blade. It should match the list of components in the user manual. Make sure that the pattern of the blade’s central holes is the same as the original. Once you’re satisfied that the blade is fitted correctly then attach it with the washer and nut included.
They Lift Grass
The longer edges of high lift blades scoop up a pocket of air while the mower is moving. This creates an air cushion that decreases friction and cuts and produces an easier cut. The cushion also absorbs debris and carries them to a side discharge chute or a grass bag for simple removal.
They are great for cutting grasses which can become clumpy. They are ideal for moist or dry lawns, but they may not be as effective when you’re mowing on dirt or sandy terrain as they tend to collect and throw dirt and stones into the air.
Make sure you take the proper safety precautions when you change the blade of your lawn mower. To get the blade in place it is necessary to place the mower on an even surface and then take off the key. The bolts holding the blade in position are able to be removed and a new one installed.
The discharge of grass
The wide edges of high-lift blades form an air pocket between the grass and them as they pass across the lawn, decreasing friction and resistance. The suction generated by the blades lifts grass clippings, launching them into a side discharge chute to make it easy to dispose of them.
Blades with low lift are ideal for cutting sandy soil since they do not produce enough suction to raise grass upwards. They are also more susceptible to damage caused by stones and other debris that can enter the refreshing mower blades sharpener during cutting.
Standard, all-purpose or 2-in-1 blades are typically found on regular mowers and one that have a rear bagging attachment. These blades have some slight curvature around the edge, which helps to reduce the clumping and also helps better disperse grass clippings across your lawn. But, they only have moderate air circulation, which could create a strain on your engine and lessen the control you have over clipping distribution.
